Gas Hob Installation
Kurts Gas Installers fits and commissions gas hobs across the East Rand and Gauteng. Over 15 years and more than 1,000 installations later, every installation is pressure tested, leak tested and issued with a Certificate of Compliance. Call 083 592 5450 for a free quote.
Need a gas hob installed?
What a Gas Hob Installation Includes
We run the gas pipework from the bottle to the hob, fit the regulator, the hose, the shut-off valve and the fittings, and pressure test and leak test the line. Then we commission the hob: we light every burner, check the flame and make sure each one works as it should. The Certificate of Compliance is written on site, before we leave.
Which appliances we can fit
Every appliance we connect has to be on the LPGSA Safe Appliance List, which is how the installation meets SANS 1539. That includes the hob you have already bought. We do not fit uncertified imports.
15
Years Experience
1000+
Gas Installations Completed
Fitting a hob into a worktop
A gas hob is set into a cut-out in the kitchen worktop, so the opening, the clearances and the position all have to be right before the appliance goes in. We check the appliance, the opening and the route from the bottle before we quote, so there is no surprise on the day.
The connection is the same as any other gas appliance: pipework from the bottle, a regulator, a hose and a shut-off valve, then a pressure test, a leak test and commissioning. If you are fitting a hob alongside a stove or a built-in oven, read gas stove installation for the rest of the kitchen, and our guide to the best gas stove to buy if you are still choosing the appliance.
Inside or outside bottle?
Where the bottle goes makes the biggest difference to the price. An inside installation puts the bottle in a cupboard next to the appliance, usually in the kitchen, and costs R2200. Most inside installations need ventilation in that cupboard. We cut the ventilation the installation needs as part of the job, and there is no separate ventilation fee.
An outside installation puts the bottle and the regulator outside and runs a gas line to the hob. That starts at R3050 for a single connection, plus R150 per metre of piping. The metre count is the length of the pipe run, not the straight-line distance, so a bottle around the back of the house is usually further than it looks. Both options are listed in the price table below.
What happens on installation day
We check the appliance and the route from the bottle, agree the price, and isolate the gas supply before we start. We position the hob, run the pipework, fit the regulator, hose and shut-off valve, and pressure test and leak test the line. Then we commission it: we light every burner, check the flame and make sure the hob works as it should.
We issue the Certificate of Compliance on site, and every installation carries a 1-year workmanship warranty. If something we installed fails inside that year and it is our work, we come back and put it right. We work Monday to Friday, 8am to 5pm. Same-day installation is possible when a technician is free; if we cannot get to you that day, we will tell you on the phone rather than promise it.
Installation prices
These are our current installation prices. The callout fee is included, and the Certificate of Compliance is included in every installation price below.
Outside installations are charged per metre of piping. A bottle five metres from the hob therefore comes to R3050 plus 5 x R150, which is R3800. If you send us pictures of the kitchen and the bottle position, we will give you an estimate over WhatsApp before we come out.
| Installation | Price |
|---|---|
| Inside installation - bottle in a cupboard next to the appliance | R2200 |
| Outside installation - single connection | R3050 + R150 per metre of piping |
| Two connections with a change-over | R4050 + R150 per metre of piping |
| 20 m+ installation with 2nd stage regulator | R4350 + R150 per metre of piping |
| 20 m+ installation with 2nd stage regulator, 2 cylinders | R4650 + R150 per metre of piping |
| Certificate of Compliance only - callout, leak test and CoC | R1500 |
A Certificate of Compliance on its own, for an installation somebody else did, is R1500 including the callout and the leak test - and only if that installation is compliant.
Our work
Photographs from our own jobs: a hob set into a kitchen worktop, a four-burner hob with every burner lit after commissioning, and a hob and geyser fitted in the same home.
Areas we cover
We install gas hobs across the East Rand and Gauteng from our base in Elspark, Germiston. Areas: Boksburg, Brakpan, Kempton Park, Bedfordview, Edenvale, Parkrand, Sunward Park, Brackenhurst, Randhart, Randburg and Johannesburg. We fit gas geysers too. If you are outside these areas, call us and we will tell you straight away whether we can take the job on.
Why choose Kurts Gas Installers for your hob
Experienced
Over 15 years and more than 1,000 gas installations behind us, from a single hob in a flat to a kitchen with a stove, an oven and a hob.
Certified
Every installation is pressure tested, leak tested and issued with a Certificate of Compliance. Every appliance we fit is on the LPGSA Safe Appliance List, so it meets SANS 1539.
Priced up front
You get a written or verbal quote before we start, and we agree on the price and the payment method before we commence with the work.
Local
We work out of Elspark in Germiston and cover the East Rand and Gauteng. Monday to Friday, 8am to 5pm, with a 1-year workmanship warranty on every installation.
Frequently asked questions about gas hob installation
How much does an outside installation cost?
How much does an inside installation cost?
Are inside installations safe?
How much does a CoC only cost?
Can you fit a hob into my kitchen counter?
Does the bottle cupboard need ventilation?
Can I supply my own hob, and which brands do you fit?
Is the Certificate of Compliance included?
What warranty do you give on a hob installation?
Do you cover my area?
Installations, where the gas bottle is placed outside, are R3050 for a single connection and R150 per meter of piping.
Installations with 2 conections and a change over are R4050 and R150 per meter of piping.
Installations, where the gas bottle is placed inside (generally inside a cupboard near or next to the gas appliance) are R2200. please note most inside installations require ventilation on the cupboard.
Yes. Installations, where the gas bottle is placed indoors, are approved by the LPG Association and are quite safe.
We charge R1500 for the issuing of a CoC (depending on location) this includes callout, CoC and leak test. please note that this only applies to compliant installations that were installed by a regestred gas installer.
Yes. The hob sits in the cut-out in the worktop and we connect it to the gas line, pressure test and leak test the installation, and commission every burner. We check the opening, the position and the route from the bottle before we quote.
Most inside installations do. The bottle sits in a cupboard, and the cupboard needs ventilation so that gas cannot build up if there is ever a leak. We cut the ventilation the installation needs as part of the job, and there is no separate ventilation fee. If the cupboard cannot be ventilated, we will tell you before we start and suggest putting the bottle outside instead.
Yes. If you have already bought the hob, we will fit it. Every appliance has to be on the LPGSA Safe Appliance List, which is how the installation meets SANS 1539. We do not fit uncertified imports.
Yes. Every new or modified installation is issued with a CoC, and it is included in the installation price. Only a registered gas installer can issue one. You need it when you sell a property, when a landlord or agent asks for it, and if you ever have to claim on your insurance after a fire - without it, an insurer can decline the claim.
Every installation carries a 1-year workmanship warranty. If something we installed fails inside that year and it is our work, we come back and put it right. The appliance itself carries the manufacturer's warranty.
We work out of Elspark in Germiston and cover the East Rand and Gauteng, including Boksburg, Brakpan, Kempton Park, Bedfordview, Edenvale, Parkrand, Sunward Park, Brackenhurst, Randhart, Randburg and Johannesburg. If you are outside that list, call us and we will tell you straight away whether we can take the job on.
Contact Us
Call Us
Whatsapp Us
Click To Whatsapp