Rinnai DELUXE KITCHEN WATER CONTROLLER (MC-100V-1A-1W)

R2,205.00

Temperature water controllers allow precise temperature control by the user. When used correctly,
the hot water unit will deliver the selected temperature, even when the water flow is varied, or more
than one tap is in use. Each water controller can be individually programmed, however the water
heater can only deliver one set temperature at any time. The available temperatures (°C) are as
follows:
Kitchen Controller:
37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 48, 50, 55°C* (60°C, 65°C, 75°C HD models only )
Bathroom Controller:
Hot Water Delivery: 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 48, 50°C
Bath fill Delivery: 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48°C
Whilst hot water outlets are open the set temperature may be lowered. However the set temperature
cannot then be raised above 43°C. In addition transfer of 'priority' between controllers is not possible.
These are safety features.
Suggested temperatures are:
Kitchen 50°C ~ 55°C* Shower 37°C ~ 43°C, Bath fill 39°C ~ 45°C
* Temperature may not be available on all installations. Rinnai water heaters can be programmed to deliver higher temperatures
via the kitchen controller. Contact Rinnai for more details.
These temperatures are suggestions only. You may find higher or lower temperatures more
comfortable. Maintaining lower temperatures helps save energy. To obtain water temperatures lower
than 37°C simply add cold water.
Water controllers are an optional extra. 'Universal' and 'Deluxe' water controllers can be fitted.
Universal Controllers allow temperature selection only. Deluxe controllers allow temperature
selection, bath fill and have a clock function.
Water controllers allow the water temperature to be set from the various locations where they are
installed. The temperature selected will be available to all outlets.
Universal (MC-91-2A) and Deluxe (MC-100V & BC-100V) Controllers - available configuration:
A maximum of 4 water controllers can be fitted. Any combination of the deluxe, universal and wireless
controllers can be used with the following limitations.
Only ONE master controller can be installed. This can be MC-100V, a MC-91 (when programmed as
a master controller) or a MC502S (wireless) controller.
Up to TWO BC-100V water controllers can be installed.
The FOURTH water controller in any installation MUST BE a MC502S (wireless) or a MC-91

The Rinnai Kitchen Deluxe Controller works in conjunction with the Rinnai Bathroom Deluxe Controller.

Digital controllers allow you to select the exact temperature of the hot water at the tap within the controller temperature range. This has a number of benefits:

  • Safety, especially if you have young children, the hot water can be pre-set to a child-safe level.
  • No need to mix hot and cold water, this reduces the affect of temperature spiking when another tap in the building is turned on.
  • Allows diagnosis of problems (such as gas supply disruption) when the appliance is serviced by displaying 'error' codes, which the service person can utilise.

HOW TO USE THE DELUXE KITCHEN WATER CONTROLLER (MC-100V)
Setting The Clock
The clock is a 12 hour AM/PM style display. To set the time press the 'Mode' button twice, this
places the controller into clock setting mode, in the digital monitor the word ‘Clock’ will be displayed
and the clock digits will flash, if this is the first time the clock has been set the starting time will be AM
12:00.
Use the or buttons to select the desired time, holding these buttons down continuously cycles
the digits. When you get close to the time you wish to set, press the button intermittently to avoid going
further than the desired time.
Turning on the Controller
If the controller is switched off (No digits other than the clock digits
displayed in the digital monitor) press the On/Off button once.
The On/Off and Transfer buttons illuminate to indicate that the hot
water unit will be ready to supply hot water once a hot water tap is
opened.
If more than one controller is fitted press the ‘Transfer’ button to
transfer priority to the desired controller.
The MC-100V controller is not water resistant, avoid direct exposure to water or
steam as these conditions may cause damage.

The MC-100V controller is not water resistant, avoid direct exposure to water or
steam as these conditions may cause damage.

Setting The Clock
The clock is a 12 hour AM/PM style display. To set the time press the 'Mode' button twice, this
places the controller into clock setting mode, in the digital monitor the word ‘Clock’ will be displayed
and the clock digits will flash, if this is the first time the clock has been set the starting time will be AM
12:00.
Use the or buttons to select the desired time, holding these buttons down continuously cycles
the digits. When you get close to the time you wish to set, press the button intermittently to avoid going
further than the desired time

Reviews

There are no reviews yet.

Be the first to review “Rinnai DELUXE KITCHEN WATER CONTROLLER (MC-100V-1A-1W)”

Your email address will not be published. Required fields are marked *

Contact Us

We Look Forward To Working With You

We Service The East rand area and ship nation wide

083 592 5450

mail@gas-installers.co.za